Customized & Application Customers usually require neodymium disc / ring /countersunk magnet + A3 steel pot with NiCuNi, Zn, painting in different colors, with hook or without hook, with screw thread or without screw thread. If customer couldn’t provide detailed specification, we usually ask for overall size, pulling force (N) & maximum working temperature. Sometimes, we can make design according to actual application like door, wall and ceiling fixture, cabinet, advertising board, display, dailyuse, etc.
Heavy Duty Office Magnet 1.Dimensions: D38 x H 12 mm 2.Materials: Ferrite Magnet + Plastic cover 3.Coating: Colorful plastic 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 11 pieces of A4 paper on white board
Office Magnet With Steel Cup 1.Dimensions: Dia 20, 30 mm 2.Materials: NdFeB Magnet + Plastic Cup 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 10 to 15 pieces of A4 paper on white board
Office Magnet With Steel Cup 1.Dimensions: Dia 16,22,25,30 mm 2.Materials: NdFeB Magnet + Steel Cup 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 11 to 17 pieces of A4 paper on white board
Rectangular Office Magnets 1.Dimensions: Length 55 x Width 22.5 x Height 8.5 mm 2.Materials:NdFeB Magnet + Plastic cover 3.Coating: Colorful plastic 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 30 pieces of A4 paper on white board
Office magnet with plastic housing 1.Dimensions: D12.7*6.35mm 2.Materials:NdFeB Magnet + Plastic 3.Coating: Colorful plastic 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 11 pieces of A4 paper on white board
Magnetic Push Pin 1.Dimensions: Dia 11, 15, 21, 27 mm 2.Materials: NdFeB Magnet + Plastic 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 11 to 27 pieces of A4 paper on white board
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
