Multi Pole Injection Ferrite Magnet 1.Material: PA6 Base resin+Ferrite Magnetic Powder 2.Dimensions: According to your requirements 3.Grade: MF-618,MF-620 and etc 4.Max Operating Temperature: -20°C to +15O°C 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: High dimensional accuracy, good consistency, no follow-up processing, stable performance, shock resistance
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Neodymium Ring Manget 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial,diametrical or radial magnetized and etc. 5.Max operating temp.: 80 to 220 degrees celsius Neodymium magnet ring used for high quality loudspeakers and other industrial application. Diametrically magnetized ring magnet used for small motors. Epoxy coated ring neodymium magnet some time be installed in the faucet to act as a filter.
Motor Magnet SmCo Magnet 1.Dimensions: According to your requirements 2.Grade: YXG26 28 30,YXG26H 28H 30H and etc. 3.Max Operating Temperature: 250 ~350 degree celsius 4.Material:SmCo5,Sm2Co17 5.Magnetized: Length,Width,Thickness and Muti-Poles 6.Advantage:High working temperature,Extremely resistant to demagnetization,Resistant to corrosion
Radial Oriented Sintered Neodymium Ring Magnet 1.Dimensions: Read the details 2.Materials: NdFeB,Grade N35 to N48, 35M to 45M, 35H to 42H, 35SH to 40SH, 35UH to 38UH,35EH 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Radial magnetized 5.Max operating temp.: 80 to 220 degrees celsius This type of neodymium ring magnets widely use for robotics and industrial automatic production line etc.
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
