Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Multi Pole Injection Ferrite Magnet 1.Material: PA6 Base resin+Ferrite Magnetic Powder 2.Dimensions: According to your requirements 3.Grade: MF-618,MF-620 and etc 4.Max Operating Temperature: -20°C to +15O°C 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: High dimensional accuracy, good consistency, no follow-up processing, stable performance, shock resistance
Multi Pole Injection Ferrite Magnet 1.Material: PA6 Base resin+Ferrite Magnetic Powder 2.Dimensions: According to your requirements 3.Grade: MF-618,MF-620 and etc 4.Max Operating Temperature: -20°C to +15O°C 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: High dimensional accuracy, good consistency, no follow-up processing, stable performance, shock resistance
Bonded neodymium Encoder Magnet Ring 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Multi Pole Injection Ferrite Magnet 1.Material: PA6 Base resin+Ferrite Magnetic Powder 2.Dimensions: According to your requirements 3.Grade: MF-618,MF-620 and etc 4.Max Operating Temperature: -20°C to +15O°C 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: High dimensional accuracy, good consistency, no follow-up processing, stable performance, shock resistance
Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Ring Shaped Alnico Magnets 1.Dimensions: According to your requirements 2.Grade: Alnico 5 , Alinico 6, Alnico 8, Alnico 9 and etc. 3.Max Operating Temperature: 450-550 degree celsius 4.Processing technique: Sintered and Cast 5.Magnetized: Axial,Diametrial or Multi-Poles 6.Advantage: High working temperature and resistant to corrosion
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
