Size customized Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test Material NdFeB Certification ISO9001/TS16949/Reach/Rosh Working temperature 60-220 Degree Centigrade
Magnetic Push Pin 1.Dimensions: Dia 11, 15, 21, 27 mm 2.Materials: NdFeB Magnet + Plastic 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 11 to 27 pieces of A4 paper on white board
Our magnets are widely applied to motors and generators such as Servo motors,Linear motors,Automotive drive motors,Wind power generators, Home theater,Instrumentation,Medical equipment,Wind turbines and Magnetic tools,Automotive sensors, Compressor motors,Audio equipment etc.
Type Permanent Material Rare Earth Magnet Grade customized Shape According to Drawing/Specs Application Industrial Magnet Certification ISO9001,ISO14001,TS16949 Delivery Time 12-15 days for sample; 18-20 days for production
Size Customized Magnet Size Coating Epoxy.Black Epoxy. Nickel.Silver.etc Test Salt Spray Testing Material NeFeB Magnet Certification ISO9001/TS16949/Reach/Rosh Working temperature 80-220 Degree Centigrade Use&Application Industrial Application
Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Size customized Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test Material NdFeB Certification ISO9001/TS16949/Reach/Rosh Working temperature 80-220Degree Centigrade Use&Application Industrial applications
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
