Alnico Shallow Pot Magnet With Countersunk Hole 1.Dimensions: Dia from 19mm to 58mm 2.Materials: Alnico 5 3.Plating/Coating: Red painted 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 525 degrees celsius They are ideal for gripping,lifting,holding,fixing applications.
Internal Thread NdFeB Pot Magnet 1.Dimensions: Dia from 10 mm to 120 mm 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Zinc,Nickel,Epoxy or Color paint. 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 80 to 220 degrees celsius They are suitable for strong and quickly removable fasten no need drilling.They widely use for trade fair,any shop build or other purpose.No matter use in private household or commercial or hobby applications are all suitable.
Ferrite Pot Magnet 1.Dimensions: Standard size or Customized 2.Materials: Ferrite 3.Plating/Coating: Zinc,Nickel 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 180 degrees celsius Ferrite pot magnets are ideal magnetic solutions for certain applications, thanks to their low cost and their remarkable attractive force.
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
