Disc/Round Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized,Diametrical magnetized and etc. 5.Max operating temp.: 80 to 220 degrees celsius Round NdFeB magnet have a wide range of applications. Even at a very small size,it is strong enough for many tasks. Tiny size like D3x1mm,D4x2mm magnet and etc. Middle size like D6x2mm,D10x1mm manget and etc. Big size like D50x30mm magnet and etc.
Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Ring Shaped Alnico Magnets 1.Dimensions: According to your requirements 2.Grade: Alnico 5 , Alinico 6, Alnico 8, Alnico 9 and etc. 3.Max Operating Temperature: 450-550 degree celsius 4.Processing technique: Sintered and Cast 5.Magnetized: Axial,Diametrial or Multi-Poles 6.Advantage: High working temperature and resistant to corrosion
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Alnico 5 For generator,micorphone lifting 1.Dimensions: According to your requirements 2.Grade: Alnico 5 , Alinico 6, Alnico 8, Alnico 9 and etc. 3.Max Operating Temperature: 450-550 degree celsius 4.Processing technique: Sintered and Cast 5.Magnetized: Thickness,Width,Length or Multi-Poles
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
