Magnetic bar with one or double flat end 1.Dimensions: Stainless steel tube dia from 10 mm to 100mm 2.Materials: Ferrite magnet or NdFeB magnet 3.Sruface treatment: Polishing 4.Magnetization direction: Diametrical magnetized 5.Max operating temp.: 80 to 300 degrees celsius 6.Surface magnetic force: 8000 - 14000 Gs
Round magnetic rod with male/external thread 1.Dimensions: Stainless steel tube dia from 10 mm to 100mm 2.Materials: Ferrite magnet or NdFeB magnet 3.Sruface treatment: Polishing 4.Magnetization direction: Diametrical magnetized 5.Max operating temp.: 80 to 300 degrees celsius 6.Surface magnetic force: 8000 - 14000 Gs
Round magnetic bar with female thread 1.Dimensions: Stainless steel tube dia from 10 mm to 100mm 2.Materials: Ferrite magnet or NdFeB magnet 3.Sruface treatment: Polishing 4.Magnetization direction: Diametrical magnetized 5.Max operating temp.: 80 to 300 degrees celsius 6.Surface magnetic force: 8000 - 14000 Gs
Customized Permanent Ferrite Magnet/Ferrite Bar Magnets 1.Dimensions: According to your requirements 2.Grade: Y30,Y30BH,Y30BH-1,Y35 and etc 3.Magnetized: Length,Width,Thickness,as optional 4.Size:max out dia. 280mm,max thickness 40mm 5.Tolerance:OD and ID 2%,+/-0.1mm for thickness
Magnetic Tool Holder 1.Stadard model:12"/ 18" /24" 2.Material: NdFeb magnet+A3 steel+abs 3.Packing: Carton box or Blister Packing or 3pcs as a set 4.Customized packing
Alnico Holding Magnets 1.Dimensions: According to your requirements 2.Grade: Alnico 5 , Alinico 6, Alnico 8, Alnico 9 and etc. 3.Max Operating Temperature: 450-550 degree celsius 4.Processing technique: Sintered and Cast 5.Magnetized: Axial,Diametical or Multi-Poles
Round Magnetic bar 1.Dimensions: Stainless steel tube dia from 10 mm to 100mm 2.Materials: Ferrite magnet or NdFeB magnet 3.Sruface treatment: Polishing 4.Magnetization direction: Diametrical magnetized 5.Max operating temp.: 80 to 300 degrees celsius 6.Surface magnetic force: 8000 - 14000 Gs
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
